Ham Radio Mast Guy Rings
DX Commander Expedition Guy Ring
$8
This is a ham radio mast guy ring that is designed to fit the DX Commander Expedition Mast. It will also fit any mast that has a diameter of 40mm at the point that you want to guy it at.
POTA33 Regular Guy Ring
$8
This is a ham radio mast guy ring designed to fit the GigaParts Explorer POTA33 mast. This is designed for the regular POTA33 mast not the POTA33H. It will also fit any mast that has a diameter of 31mm at the point that you want to guy it at. The guy ring is made of PETG and has 3 guy points. This is designed for temporary outdoor use.
SOTABeams Carbon 6 / POTA 20
Guy Ring
$8
This is a ham radio mast guy ring designed to fit the SOTAbeams Carbon 6 and the GigaParts POTA 20 masts. It’s designed to be as small and light as possible while still being strong and durable.
It will also fit any mast that has a diameter of 26mm at the point that you want to guy it at. The guy ring is made of PETG and has 3 guy points. This is designed for temporary outdoor use.
POTA33H
Guy Ring
$9
This is a ham radio mast guy ring designed to fit the GigaParts Explorer POTA33H mast. This is designed for the POTA33H mast not the regular POTA33. It will also fit any mast that has a diameter of 43mm at the point that you want to guy it at. The guy ring is made of PETG and has 3 guy points. This is designed for temporary outdoor use.
Military Mast Guy Ring
$12
This is a ham radio mast guy ring designed to fit the fiberglass military mast. It will also fit any mast that has a diameter of 40mm at the point that you want to guy it at. This guy ring is designed to be extra strong. It is a similar design to my other guys rings except that every feature is thicker. The ring slides onto the connecting section of the mast sections and the next mast section fits into the top of the guy to provide extra stability. The guy ring is made of PETG and has 3 guy points.
Military Mast Topper
$10
This is designed to fit the top of the fiberglass military mast. It has an internal diameter 40mm so it will fit other masts/poles. The smaller holes are 12.75mm in diameter. This topper is designed to be extra strong. It offers plenty of mounting options for extra guy lines and antenna mounts. Use a carabiner and connect a wire antenna, or use a 3/8×24 to SO239 stud to mount a vertical antenna, or connect a combination of antennas.
SOTABeams Tactical Mini Guy Ring
$8
This is a ham radio mast guy ring that will fit the SOTABEAMS Tactical Mini. It may fit other similar masts that measure 35mm at the guy point. The guy ring is made of PETG and has 3 guy points. This is designed for temporary outdoor use.
The paracord, camlock carabiners, and mast are not included.
What you will receive is 1 guy ring.
DX Commander Classic Guy Ring
$9
This is a ham radio mast guy ring is designed to fit the DX Commander Classic mast. It will also fit any mast that has a diameter of 44mm at the point that you want to guy it at. The guy ring is made of PETG and has 3 guy points. This is designed for temporary outdoor use.
The paracord, camlock carabiners, and mast are not included.
What you will receive is 1 guy ring.
Organization
HT Wall Mount Organizer
$10-$14
Organize your HT’s on a wall or inside a cabinet. I’ve made 2 options for the organizer a 2 slot and a 4 slot. Mix and match them to organize your HT’s any way you please. There are multiple mounting options for this product. There are 2 screw holes to mount directly into a wall or cabinet. The back also has a concave area where double sided adhesive strips, Command strips, or hook and loop strips can be used to mount if using screws is not an option.
Measurements –
4 HT Slots – 10 1/4″” L x 1″ W x 1 1/8″ T
2 HT Slots – 4 3/4″ L x 1″ W x 1 1/8″ T
MOUNTING HARDWARE IS NOT INCLUDED.
Mounting with Screws –
Pre drill holes with a drill, then use a handheld screw driver to tighten screws by hand. Screws only need to be snug.
DO NOT USE AN IMPACT GUN TO TIGHTEN SCREWS. PRODUCT WILL BREAK.
These are made from PLA and are recommended for indoor use only.
HT Antenna Organizer
$10
Organize your HT antennas and get them off of your desk. This can be mounted to a wall or inside a cabinet. This organizer has spots for 7 antennas. This is designed to fit most rubber duck and aftermarket HT antennas. This is made from PLA and is recommended for indoor use only. This is designed to be mounted using 2 screws, double sided adhesive, Command strips, or hook and loop.
MOUNTING HARDWARE IS NOT INCLUDED
Miscellaneous
55-59 Chevy Truck Holley EFI Pro 6.86 Dash Kit
$175
This is a dash insert and mounting bracket for a Holley EFI Pro 6.86 that fits 55-59 Chevy trucks. The insert and mounting bracket are made from PET-GF and are extremely durable and heat and vibration resistant. The material also will not conduct or create any static electricity.
This has been designed to mount directly to the factory dash trim bezel using all of the factory mounting holes. The dash insert has 4 brass threaded mounting holes for the Holley EFI Pro mounting bracket and an embedded anti-vibration gasket for the front edge of the Holley EFI Pro screen. It also has an embedded anti-vibration strain relief foot that rests against the inside of the dash insert.
The kit includes –
1 Dash Insert
1 Holley EFI Pro 6.86 Mounting Bracket
1 TPU Anti-Vibration Gasket
4 M4 Screws
4 M4 TPU Anti-Vibration Washers
4 M4 Lock Washers
**** Holley EFI Pro 6.86 screen and factory trim bezel are not included
Universal Magnetic Cupholder
$24.99
This is a truly universal magnetic cupholder. It will hold everything from skinny cans to tumblers to large water bottles up to 3.6 inches in diameter. The topper is removable the cupholder can securely hold objects up to 3.6 inches in diameter. This cupholder is made from durable PETG, includes a flexible TPU topper, and 3 – 40lb neodymium magnets. The super strong magnets make sure your drink is not flying off of your forklift, lawn mower, tractor, or whatever you decide to stick it to.
The magnets do have an anti-scratch coating but are NOT guaranteed to not scratch paint if they are moved around.
At this time the only color available for the topper is black.
Please select your color and pattern
Package will include:
1 – Magnetic Cupholder
1 – TPU Topper
**Magnetic metals are Steel, Iron, Nickel, and Cobalt
**Magnets will not stick to Aluminum, Titanium, or Plastic
Hiking
Ultralight Leave No Trace Backpack Hanger
$10
Sometimes you just need a simple hook to hang stuff on. This gives you that option without causing any damage to a tree.
English 
Spanish